Internship

Automatic calibration and test stand

The job

Prime Vision develops a new type of sorting machine: a handling projector. This projector is mounted above a sorting chute or moving belt in a sorting center. It is capable of reading barcodes of parcels that lie below the projector and can project characters on the parcels helping the process of people placing the parcels in specific containers or van.

After assembling these devices need to be calibrated and tested. This is now mainly a manual task. The aim of this assignment is to work on an automated calibration- and test stand. This is not a single assignment but a continuous effort of multiple internships; every task is a single assignment:

  1. Automatic calibration stand
    Calibration is done on several levels. Level should automatically be adjusted, and a trigger should be sent to the projector to continue the calibration.
  2. Projection detection test
    Using a high-speed camera and the use of neural networks test projections are tested for shape and location.
  3. Telezoom detection
    By automatically placing barcodes it is validated if these are detected properly.
  4. Light condition test
    By adjusting light conditions to match daylight, TL-light and direct light it is tested if detection works properly.

Your background

  • An HBO / WO student (micro)electronics, mechatronics or software engineering;
  • You are handy and can use mechanical tools;
  • You take initiative to get things done;
  • You have a practical mindset.

What you can expect from us

You will be properly supervised during your work placement and be given the scope to get the best out of yourself.

Naturally, we provide a suitable work placement compensation.

About us

Prime Vision is one of the leading mid-scale systems integrators and a pioneer in logistics technology innovation. Our company is all about innovation in IT. We converge the knowledge from our long history and experience in deep learning and the latest IoT and Robotics capabilities to create a fertile ground for innovative thinkers and problem solvers.

We offer an internship or graduation assignment to the person who likes to work on product development and who wants to lay the foundation for new technologies within our company.

Do you have what it takes?

Send an email, apply for the position.

Apply for internship

Automatic calibration and test stand

To apply, please send your job application, accompanied by your C.V. and motivation letter. 

If you have any issues with this form, please contact Peggy Kosters at sollicitaties@primevision.com.

Note: Accepted file types are .pdf, .doc and .docx.

By sending this form I agree with the privacy statement

TOP